aevcomunicazione.com

heat treatment Archive

  •   Guns require a careful choice of materials and heat treatments, preceded by a study carried out in laboratories of metallurgical analyzes and analytical laboratories that control materials and undertakes the  development on treatments and surface finishes. Especially for some weapons that work...

    Weapon and heat treatments

    Posted on April 20, 2012 | No Comments
      Guns require a careful choice of materials and heat treatments, preceded by a study carried out in laboratories of metallurgical analyzes and analytical laboratories that control materials and undertakes the  development on treatments and surface finishes. Especially for some weapons that work...

    Continue Reading...

  • MECSPE 2012, reference point for manufacturing industry, held in Parma from 29 to 31 March 2012, comes to an end. Eight salons, meeting point of technologies for producing and industrial sectors: Eurostampi, Subcontracting, Treatments & Finishes, Logistics, Control Italy, Motek Italy and Plastix Expo. More than 25.000 visitors visited the stand during the three day...

    HTS at MECSPE 2012

    Posted on April 20, 2012 | No Comments
    MECSPE 2012, reference point for manufacturing industry, held in Parma from 29 to 31 March 2012, comes to an end. Eight salons, meeting point of technologies for producing and industrial sectors: Eurostampi, Subcontracting, Treatments & Finishes, Logistics, Control Italy, Motek Italy and Plastix Expo. More than 25.000 visitors visited the stand during the three day...

    Continue Reading...

  • Drills are very different. They come in all shapes and sizes for every material to be drilled has particular characteristics: there are drills for wood, for iron, for concrete, glass and many other materials. When the drill is operating, then, the speed of rotation heats the material which loses its hardness. If the drill is notsuitable for use, warming will be...

    Which is the most suitable drill?

    Posted on February 28, 2012 | No Comments
    Drills are very different. They come in all shapes and sizes for every material to be drilled has particular characteristics: there are drills for wood, for iron, for concrete, glass and many other materials. When the drill is operating, then, the speed of rotation heats the material which loses its hardness. If the drill is notsuitable for use, warming will be...

    Continue Reading...

  • This month we interviewed Mr. Ezio Gianotti, T.T. Ferioli & Gianotti SpA managing director. Talk about T.T. Ferioli & Gianotti SpA. T.T. Ferioli & Gianotti has fifty years of experience in the field of heat treatment of metals. Founded in 1959 by two founding partners both from an experience in Steel Mill. The business was successful thanks to a industrial philosophy projected toward highest...

    HTS e T.T Ferioli & Gianotti: Ezio Gianotti interviewed

    Posted on January 27, 2012 | No Comments
    This month we interviewed Mr. Ezio Gianotti, T.T. Ferioli & Gianotti SpA managing director. Talk about T.T. Ferioli & Gianotti SpA. T.T. Ferioli & Gianotti has fifty years of experience in the field of heat treatment of metals. Founded in 1959 by two founding partners both from an experience in Steel Mill. The business was successful thanks to a industrial philosophy projected toward highest...

    Continue Reading...

  • First choice of the consumer goes to good-looking articles, also in the field of household products and appliances. The appearance is important. Washing machines sheet metal parts often take particular forms and they are aesthetically enjoyable; this is due to the shape of the material when it is...

    Appearance is important

    Posted on January 16, 2012 | 1 Comment
    First choice of the consumer goes to good-looking articles, also in the field of household products and appliances. The appearance is important. Washing machines sheet metal parts often take particular forms and they are aesthetically enjoyable; this is due to the shape of the material when it is...

    Continue Reading...

  • The quality of kitchen knives, you know, depends on the quality of the material used for the blade. Steel must be hard to cut as simply as possible, but at the same time it must be flexible to withstand the friction of the blade on the food without breaking,...

    Perfect stainless steel knives

    Posted on December 23, 2011 | No Comments
    The quality of kitchen knives, you know, depends on the quality of the material used for the blade. Steel must be hard to cut as simply as possible, but at the same time it must be flexible to withstand the friction of the blade on the food without breaking,...

    Continue Reading...

  • Gas turbine is a source of energy widely used, but not everyone knows its operation. First of all, it is fueled by natural gas and it is generally composed of three parts: the compressor which increases the pressure of the gas, the combustion...

    Gas turbines and superalloys

    Posted on December 23, 2011 | No Comments
    Gas turbine is a source of energy widely used, but not everyone knows its operation. First of all, it is fueled by natural gas and it is generally composed of three parts: the compressor which increases the pressure of the gas, the combustion...

    Continue Reading...

  • Aluminum is a very light and flexible metal, making it the ideal material in many fields. This metal in the automotive industry can make a big difference:  less weight means car’s low fuel consumption and higher rates. Performance increase and the environment is safe. The latest Mercedes SL , which...

    Super metal: Aluminum

    Posted on November 30, 2011 | No Comments
    Aluminum is a very light and flexible metal, making it the ideal material in many fields. This metal in the automotive industry can make a big difference:  less weight means car’s low fuel consumption and higher rates. Performance increase and the environment is safe. The latest Mercedes SL , which...

    Continue Reading...

  • The eighteenth edition of Euromold, world fair for dies and tools, is taking place in Frankfurt from November 29th to December 2nd.  1500 exhibitors are expected from 45 countries. The host nation is Korea this year. Among the first German Asian trading partners, it provides, as in previous...

    Euromold 2011: forward-looking trade fair

    Posted on November 15, 2011 | No Comments
    The eighteenth edition of Euromold, world fair for dies and tools, is taking place in Frankfurt from November 29th to December 2nd.  1500 exhibitors are expected from 45 countries. The host nation is Korea this year. Among the first German Asian trading partners, it provides, as in previous...

    Continue Reading...

  • The sintering of powders is a process widely used but little known to obtain objects of daily use. It consists in the aggregation and shrinking of dusty materials in solid artefacts thanks to a heat treatment. Connecting rods, gears, brake systems:  there are many applications in different fields...

    All is dust

    Posted on November 15, 2011 | No Comments
    The sintering of powders is a process widely used but little known to obtain objects of daily use. It consists in the aggregation and shrinking of dusty materials in solid artefacts thanks to a heat treatment. Connecting rods, gears, brake systems:  there are many applications in different fields...

    Continue Reading...

Older Entries